Wednesday, March 11, 2009

Welcome to Buck Diamond Grilles

Thank you for your interest in a Buck Diamond Grille. Buck Diamond Grilles are no longer available for direct sale.  What remaining stock is being sold by  Please go there to purchase.  The rest of the website (installation, questions and answers) remain available.

Satisfaction guaranteed or your money back. Buck (Revised 10/1/11 - new email address, new ph # 980-345-6139)


Ready to Purchase? CANNOT BE PURCHASED DIRECTLY   Go to  Ready to Install? Go here.

My standard grille offerings are the Forward Profile and Mid-Profile Grilles for the Mazda Miata Model years 1990 - 2006 and I normally have them in stock and ready to ship. A Miata grille is $129 plus $8 USPS Priority mail shipping. Other countries are prevailing rates for USPS International Express. Installation is simple. If you have a 2001 - 2006 Miata, you do not have to remove your tiedown hooks. Visit my online installation guide for more information.

There are Forward Profile Grilles for Miata years 1990-1997.

There are Forward Profile Grilles for Miata years 1999-2000.

There are Forward and MidProfile Grilles for Miata years 2001-2006. A Midprofile grille is slighly smaller than the Forward Profile Grille. It can be installed on a Mazdaspeed Miata in front of the hooks. It can also be installed on a standard 2001-06 Miata, but you have to remove the hooks. This gives a more recessed look on the standard 01-06 Miata.

For more information on the mesh and trim, visit Materials Info.

For a list of the most common questions and answers, visit Q&A.

For more pictures of the grilles for the various Miata model years, please choose a Photo Gallery in the right column.

If you are interested in a grille for the BMW or Honda S2000 below, please contact me at or call me at 980-345-6139 to discuss. I do not stock these grilles but can deliver them within 2 weeks of an order.

If you have any questions, feel free to give me a call at 980-345-6139 or email me at

Thank you for visiting my site. Buck

Photo Gallery - M2.1 2001-2006 Miata Forward Profile

Photo Gallery - M2.1 2001-2006 Miata Forward Profile

Photo Gallery - M2.2 Midprofile for 01-06 Std Miata and 01-06 Mazdaspeed

M2.2 Midprofile Installed on Std Miata 2001-2006
(hook removal required)

The midprofile grille fits on a standard Miata (base or LS) about 2 to 3 inches from the lip edge. The midprofile grille does require that the tiedown hooks be removed prior to installing. This gives a more recessed look than the forward profile grille but the tiedown hook removal is an extra step that a purchaser must also consider.

M2.2 Midprofile Installed on Miata Mazdaspeed 2001-2006
(no hook removal!)

Photo Gallery - M1.0 1990-1997 Forward Profile Grille

M1.0 1990-1997 Forward Profile Grille

Photo Gallery - M2.0 1999-2000 Forward Profile Grille

M2.0 1999-2000 Forward Profile Grille

Mesh & Trim Material Information

The mesh is stainless steel 302 with approximately 2 holes per inch. Highly resistant to rust, and 1/8" thick, the mesh will hold its shape and perform for many years. The trim is a high quality durable sand finish vinyl with internal aluminum 'teeth' to grab and hold the mesh.

This is a true mesh weave, not stamped or bonded. The steel mesh's complex weave and double crimping on both front and back is what gives this diamond pattern its spectacular sheen and strong visual stimulus! This has NOT been polished, and the photos have not been retouched in any way.

Each open square is 1/2 inch in width and height. In steel mesh terms, this is a 2 mesh. The wire diameter is .120 (about 1/8 of an inch, that's equivalent to 11 gauge wire!), and an open air ratio exceeding 75%.

If you have any questions about the mesh, please contact me at 980-345-6139 or email me at Buck

Questions and Answers

Questions and Answers

If you have a question that is not answered here, give me a call at 980-345-6139 or email me at

Tags and the Grille

Miata - The metal bracket which holds the front tag required in my state seems to be in the way. What should I do?

Forward and Mid Profile - Can be accomodated with little or no adjustment. Here's how.

Is there an 'air gap' between the tag horizontal support bars and the roof of the mouth? If yes, you should bend your tagframe bars to get them flush to the mouth's roof. Now, compress the trim where it hits the brakcet at the roof of the mouth. This is probably all you need to do to accomodate the tag's bars. If you have to, you may need to shave a little of the trim's top where it hits the bars. This is the second most likely scenario. It just depends on how thick the bar(s) are that come out from the roof to the front. If the bars are really thick, you may need to cut the trim and remove pieces the same width of the tag frame bars. This last alternative is for the most extreme case, i.e., extra thick tag bars , and no one has done that who has required a front tag. In all these cases, you won't be able to see the alteration unless you get down really low since the grille is recessed at the roof about 1 to 2 inches and the trim at the top is just not visible without an effort. Besides, the tag will be in front of the trim at the top anyway.

Regarding strap placement, if the two outers holes are used by the tag bars, use the center hole for both straps. Some tagframes use only the center tag hole. If this is true, use the two outer holes for the straps.

Bras and the Grille

MIATA - For the 99-2000 OEM bras, and the 2001 -2004 OEM bra, the bra does wrap into the mouth and use hook attachments on the inside edge to hold it in place. This means that the grille will coexist and will fit on top of the bra, but installation or removal of the bra would also require removal and reinstallation of the grille. Here's an example: The grille is installed but no bra is installed. To install the bra, the grille would have to be removed, the bra installed and the grille reinstalled. To remove the bra, the grille would have to be removed, the bra would then be removed, and the grille reinstalled. It is also possible that only a partial removal of the grille is needed to install the bra. You may only need to detach the grille at the bottom points, lift slightly to install the bra, then, using new straps, tighten the bottom of the grille back down.

As I have installed numerous Buck Diamond grilles, it takes me about 10 minutes to cut the straps on an installed grille, and then reinstall with new straps. This issue of additional install and removal needs to be considered by you. It depends on how often you use your bra, or how often you wish to remove it. If only a few times a year, this may not be an issue for you. I would note that I have heard that having a bra on your Miata for extended periods is not good for the paint. I think this relates to uneven UV exposure as the bra is not allowing the paint underneath to 'breathe,' the risk of dulling of the paint's finish from the bra's slight movements and the issue of lingering dampness underneath a bra not being good for the paint. I may be totally wrong about this, but that is what I have read as concerns about bras. I guess it is a damned if you do (paint risk) or damned if you don't (rock chips risk) situation.


How much does the Grille weigh?

Miata - 2 lbs.

GENERAL QUESTIONS (apply to all grilles)

Replacement Straps

I use 14 inch straps I buy at Home Depot or Lowe's, but you can use shorter, just a little more difficult to manipulate.

Care of the Grille

Wash when you wash your car. Once a year, apply a vinyl treatment to the vinyl to keep it looking fresh. That's it.

Got more questions? Email me at or call me at 980-345-6139 anytime.